How to Make a Pussy Yourself – Silicone Version & Simple DIY Method
September 8, 2025 2025-09-08 11:17How to Make a Pussy Yourself – Silicone Version & Simple DIY Method
How to Make a Pussy Yourself – Silicone Version & Simple DIY Method
Table of Contents
Some people, out of curiosity or budget concerns, want to know how to make apussy at home. In fact, there are two possible ways: one is the silicone DIY version, and the other is the simple home version made from everyday items. Below, I’ll break the steps down in detail so you can actually try it yourself.
Method One: Silicone DIY Version
Best for: Individuals who desire a more realistic sensation and one that will last longer.
1. Where to buy silicone?
- Recommended stores: Amazon, Taobao, AliExpress, craft stores, or 3D mold material stores.
- Search terms: food-grade silicone, medical silicone, skin-safe silicone, mold silicone (Smooth-On, Dragon Skin type brands).
Important notes:
- You cannot melt down an old silicone or TPE toy to reshape it. Those are heat-formed products and won’t remelt. Heating them can also release harmful fumes.
- You must buy a liquid silicone kit (comes with base and curing agent), which is designed for molding.
2. Materials you need
- Liquid silicone + curing agent (essential)
- Mold: cup, cut plastic bottle, or special mold box
- Plastic wrap or mold release spray (to keep silicone from sticking)
- Stirring stick, small spatula
- Water-based lubricant
3. Steps to make it
Prepare the mold
- Choose a hard cup or small bucket and cover the inside with plastic wrap.
- Smooth the wrap; wrinkles will make marks inside.
Mix the silicone
- Mix silicone and curing agent according to instructions (usually 100:2 or 100:5).
- Mix slowly to avoid bubbles.
Pour into the mold
- Pour slowly into the cup, filling almost full.
- Slightly rock the cup to let the bubbles rise out.
Shape the entrance
- Before it hardens, use a spoon or finger (with gloves) to pinch a small “V”-shaped opening.
- Make sure the entrance isn’t too tight or too loose.
Let it cure
- Leave it in a cool place for 12–24 hours until it’s fully soft and cured.
Remove & trim
- Take it out of the mold and trim off any rough edges with scissors.
- Make sure there are no sharp parts.
4. Use & care
- Gentle soap and warm water to wash with before initial use.
- Always use water-based lubricant.
- Clean thoroughly after each use, air dry, and dust lightly with a little baby powder or cornstarch to prevent stickiness.
- A well-made silicone DIY pussy can last 3–6 months or even longer.
Method Two: Simple Home Version
Best for: Tight budget, or for something temporary and quick.
- Materials you’ll need
- Sponge or towel (soft fabric is best)
- Plastic bag or plastic wrap (to ensure liquids don’t seep through)
- Disposable glove or condom (optional, gives it elasticity and smoothness)
- Rubber bands or tape (to hold it together)
- Water-based lubricant
2. Steps to make it
Prepare the filler
- Take a soft sponge or thick towel, fold it into a cylinder shape.
- If using a sponge, cut a small hole in the center to create a tunnel.
Wrap the outside
- Wrap the sponge with a plastic bag or wrap to avoid dirtying.
- For added realism, put in a glove or condom as lining.
Hold the shape
- Hold the outside with rubber bands or tape in cylinder form.
- Tighten the entrance a little to mimic a natural opening.
Use
- Put in plenty of water-based lube inside before use.
- Discard the inner lining (glove/condom) after use to disinfect and replace the outer cover as needed.
3. Use & care
- This version only lasts a few uses. Sponges can grow mold or harden.
- Replace the materials every 2–3 uses to stay hygienic.
Comparison Between the Two Methods
Aspect | Silicone DIY Version | Simple Home Version |
Materials | Buy silicone online (Amazon/Taobao) | Common items from any store (sponge, plastic bag) |
Difficulty | Medium, needs mixing and curing | Easy, 10–20 minutes |
Realism | Very close to a real toy, soft and adjustable | Basic feel, mostly relies on lube |
Durability | 3–6 months or more | Only 2–3 uses |
Cost | Medium (around $15–30 for silicone kit) | Very low, almost free |
Conclusion & Recommendation
Making your own “pussy” can be a fun experience. Both methods have their advantages:
- Basic home version: fast, cheap, virtually no cost, good for beginners to practice.
- Silicone DIY version: more realistic, longer-lasting, good if you’re willing to invest a little more time and money.
That said, DIY always has its downsides. Either it’s a bit complicated to make, or it doesn’t last long. Later I realized there’s actually a much easier option: tiny sex dolls.
These dolls are small, easy to store and clean, but still keep the soft and tight feeling of real skin. They work perfectly as a lightweight “pussy” while also offering a more complete experience.
In my opinion:
- If you just want to experiment, DIY is fun.
- If you want something reliable for the long term, a tiny sex doll is the better choice.
It’s like cooking at home versus ordering food delivery—doing it yourself can be interesting sometimes, but if you want convenience and the best results, the ready-made option is much easier.
